74165-TBT-H01 Bumper Corner Trim for HONDA Crider 2019 Left
Primary OE reference: 74165-TBT-H01
Cross-reference number 1: 74165-TBT-H01
Cross-reference number 2: 74165TBTH01
Product: Bumper Corner Trim
Vehicle: HONDA Crider 2019
Installation area: Body exterior
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-060
Fitment note: check adjacent garnish pieces; match the stated body style; confirm the vehicle market before ordering 74165-TBT-H01
Product comparison: review the centre alignment; compare the end termination; inspect the fastening slots against the removed bumper corner trim
Installation note: trial-fit without force; review the completed alignment; inspect every screw point on the Crider
Wholesale enquiry: state the required quantity; retain the product label; confirm the delivery schedule for HD02005-060
Application guidance: A correct HD02005-060 selection should follow the original contour, finish and clip direction. Also confirm the installation position, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
74165-TBT-H01 Bumper Corner Trim Product Overview
Prepared for wholesale and replacement-part enquiries, 74165-TBT-H01 covers a bumper corner trim for HONDA Crider 2019. Item HD02005-060 belongs in the body exterior installation zone and should be matched by OE number, shape and mounting points.
A correct HD02005-060 selection should follow the original contour, finish and clip direction. Also confirm the installation position, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Crider
Before sourcing this bumper corner trim for Crider, review facelift differences, confirm the installation position, and review the end profiles. At the workshop preparation stage, confirm the vehicle market, verify the mounting side, and review market-specific styling.
Before confirming this verify against the original part bumper corner trim, review market-specific styling, compare the mounting direction, and compare every attachment point. For a repeat wholesale order, confirm the surface specification, review facelift differences, and check the vehicle build date.
For HONDA Crider 2019, check adjacent garnish pieces, confirm the vehicle market, and match the stated body style. While reviewing the supplied photographs, inspect the original contour, confirm the installation position, and check the vehicle build date.
Bumper Corner Trim Design and Replacement Notes
When separating nearby Crider trim variants, examine the visible finish, check the panel transition, and inspect the back-side structure. During the physical comparison, compare the original edge profile, review the surface texture, and check the bumper interface.
When comparing 74165-TBT-H01 with the removed part, inspect the fastening slots, review the surface texture, and inspect narrow moulding ends. When checking the visible exterior face, review transferred hardware, inspect the back-side structure, and review nearby cover openings.
For the listed 2019 application, review transferred hardware, compare visible edge height, and inspect the locator direction. At the workshop preparation stage, check the panel transition, review transferred hardware, and compare visible edge height.
For a direct comparison of 74165-TBT-H01, confirm the production year, check the moulding curvature, align the centre first, and confirm separate accessory needs. The bumper corner trim should match the original left body exterior profile before it is installed or released for shipment.
Installation Guidance
Before sourcing this bumper corner trim for Crider, review the completed alignment, inspect the surrounding guides, and confirm the final trim gap. While checking adjacent body parts, clean the mounting channel, support the trim evenly, and protect the visible surface.
Before confirming this verify against the original part bumper corner trim, trial-fit without force, check adjacent panel gaps, and check lamp-cover clearance. Before clips or hardware are transferred, review separate hardware needs, inspect the surrounding guides, and protect the visible surface.
For HONDA Crider 2019, avoid bending long sections, check the final perimeter, and protect the visible surface. During the physical comparison, avoid bending long sections, check the final perimeter, and protect the visible surface.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 74165-TBT-H01 |
| Cross-reference numbers | 74165-TBT-H01 74165TBTH01 |
| Internal item code | HD02005-060 |
| Vehicle brand | HONDA |
| Vehicle model | Crider |
| Model year | 2019 |
| Installation area | Body exterior |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Crider 2019 |
Wholesale Supply and Packing
When separating nearby Crider trim variants, state annual purchasing volume, state the destination port, and state the required quantity. Before packing the confirmed item, include the complete OE number, protect projecting locators, and retain the product label.
When comparing 74165-TBT-H01 with the removed part, state the required quantity, protect projecting locators, and review carton edge protection. For a no-force trial fit, confirm the packing method, send original-part photographs, and inspect the receiving condition.
For the listed 2019 application, protect projecting locators, support the moulding length, and inspect the receiving condition. While checking adjacent body parts, retain the product label, confirm sample requirements, and state the target application.
A quotation request should state 74165-TBT-H01, HD02005-060, HONDA Crider 2019, required quantity and destination. VIN data and original-part photographs allow the supplier to review the line before confirming commercial terms.
Frequently Asked Questions
What information is needed for a 74165-TBT-H01 quotation?
Send HONDA Crider 2019 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Crider, inspect the original contour, review the surface texture, inspect every screw point, and state the required quantity before installation or quotation.
How should 74165-TBT-H01 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Crider, compare the removed trim, review the outer-edge shape, align the centre first, and request export quotation terms before installation or quotation.
Which vehicle is 74165-TBT-H01 listed for?
The source application is HONDA Crider 2019. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For Crider, compare the complete OE number, inspect narrow moulding ends, confirm an even seated fit, and review carton edge protection before installation or quotation.
Does 74165-TBT-H01 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Crider, check nearby lamp openings, compare the original edge profile, avoid bending long sections, and support the moulding length before installation or quotation.
Is a model name alone enough to order 74165-TBT-H01?
No. The Crider name is useful for discovery, but OE number 74165-TBT-H01, VIN or build data, side, finish and physical attachment points should agree. For Crider, confirm the surface specification, review transferred hardware, support the trim evenly, and send original-part photographs before installation or quotation.
Request a Quote
Send the complete OE reference 74165-TBT-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
