71512-TBT-H01 Bumper Trim Molding for HONDA Crider 2019 Left
Primary OE reference: 71512-TBT-H01
Cross-reference number 1: 71512-TBT-H01
Cross-reference number 2: 71512TBTH01
Product: Bumper Trim Molding
Vehicle: HONDA Crider 2019
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-056
Fitment note: compare the removed trim; compare every attachment point; match the original clip spacing before ordering 71512-TBT-H01
Product comparison: check the bumper interface; review the centre alignment; compare the original length against the removed bumper trim molding
Installation note: avoid bending long sections; inspect every screw point; review separate hardware needs on the Crider
Wholesale enquiry: provide the delivery country; confirm the delivery schedule; confirm separate accessory needs for HD02005-056
Application guidance: Use 71512-TBT-H01 as the main lookup reference for this Crider exterior component. Also confirm the vehicle market, review the outer-edge shape, protect painted panel edges, and request protective inner packing.
71512-TBT-H01 Bumper Trim Molding Product Overview
OE number 71512-TBT-H01 is the primary lookup key for this bumper trim molding listed for HONDA Crider 2019. The 2019 specification and supplier code HD02005-056 help distinguish it from neighbouring facelift or market variants.
Use 71512-TBT-H01 as the main lookup reference for this Crider exterior component. Also confirm the vehicle market, review the outer-edge shape, protect painted panel edges, and request protective inner packing.
Fitment and Application for Crider
Before the removed component is discarded, confirm the production year, review facelift differences, and inspect the original contour. Before clips or hardware are transferred, check nearby lamp openings, review market-specific styling, and check the vehicle build date.
During an OE-led check for HD02005-056, check nearby lamp openings, compare the removed trim, and compare the mounting direction. During the physical comparison, review facelift differences, confirm the installation position, and review the end profiles.
For wholesale selection of 71512-TBT-H01, review the end profiles, match the stated body style, and match the bumper outline. When checking the visible exterior face, confirm the vehicle market, check nearby lamp openings, and check adjacent garnish pieces.
Bumper Trim Molding Design and Replacement Notes
When preparing a Crider exterior repair, review the outer-edge shape, check the moulding curvature, and check the panel transition. For a no-force trial fit, check the adjoining gap, check the bumper interface, and review the outer-edge shape.
During comparison with the original bumper trim, compare the end termination, review transferred hardware, and review the outer-edge shape. While checking adjacent body parts, inspect the fastening slots, compare the original length, and examine the visible finish.
For a replacement on the left rear area, check the adjoining gap, compare the original length, and check the bumper interface. Before clips or hardware are transferred, compare visible edge height, review the outer-edge shape, and compare the original edge profile.
For a direct comparison of 71512-TBT-H01, inspect the original contour, inspect the locator direction, confirm the fitting direction, and confirm the packing method. The bumper trim molding should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
Before the removed component is discarded, review the completed alignment, trial-fit without force, and avoid bending long sections. Before the quotation is confirmed, review separate hardware needs, clean the mounting channel, and transfer reusable clips carefully.
During an OE-led check for HD02005-056, trial-fit without force, align the centre first, and inspect damaged mounting points. Before packing the confirmed item, transfer reusable clips carefully, check adjacent panel gaps, and confirm locator engagement.
For wholesale selection of 71512-TBT-H01, avoid bending long sections, confirm the fitting direction, and confirm an even seated fit. For a no-force trial fit, clean the mounting channel, align the centre first, and confirm locator engagement.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71512-TBT-H01 |
| Cross-reference numbers | 71512-TBT-H01 71512TBTH01 |
| Internal item code | HD02005-056 |
| Vehicle brand | HONDA |
| Vehicle model | Crider |
| Model year | 2019 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Crider 2019 |
Wholesale Supply and Packing
When preparing a Crider exterior repair, request export quotation terms, include the complete OE number, and state the target application. Before final installation, state the destination port, request supported carton packing, and confirm separate accessory needs.
During comparison with the original bumper trim, provide the delivery country, confirm the surface requirement, and support the moulding length. During receiving inspection, confirm sample requirements, confirm separate accessory needs, and state annual purchasing volume.
For a replacement on the left rear area, support the moulding length, confirm separate accessory needs, and state the destination port. Before the quotation is confirmed, include the complete OE number, retain the product label, and check the ordered mounting side.
For 71512-TBT-H01, align finish acceptance, quantity, delivery schedule and carton protection under item HD02005-056. The verify against the original part surface should be documented before a production lot is released.
Frequently Asked Questions
What product does OE 71512-TBT-H01 identify?
71512-TBT-H01 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Crider, review market-specific styling, check the panel transition, clean the mounting channel, and request supported carton packing before installation or quotation.
How should the position of 71512-TBT-H01 be confirmed?
This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Crider, match the original clip spacing, inspect the moulding width, confirm the fitting direction, and state the required quantity before installation or quotation.
Why should supplier code HD02005-056 stay on the enquiry?
HD02005-056 connects the 71512-TBT-H01 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For Crider, verify the mounting side, compare gloss or plating, inspect damaged mounting points, and request export quotation terms before installation or quotation.
Can a photo alone verify 71512-TBT-H01?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71512-TBT-H01 and HD02005-056 with the removed part dimensions. For Crider, check the vehicle build date, examine the visible finish, review the completed alignment, and review carton edge protection before installation or quotation.
Is professional installation recommended for 71512-TBT-H01?
Yes. A workshop can dry-fit HD02005-056, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Crider, confirm the vehicle market, check the adjoining gap, retain the removed component, and support the moulding length before installation or quotation.
Request a Quote
Send the complete OE reference 71512-TBT-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
