71503-T6P-H00 Bumper Trim Molding for HONDA Crider 2013
Primary OE reference: 71503-T6P-H00
Cross-reference number 1: 71503-T6P-H00
Cross-reference number 2: 71503T6PH00
Product: Bumper Trim Molding
Vehicle: HONDA Crider 2013
Installation area: Rear
Side / orientation: Unspecified
Surface detail: verify against the original part
Internal item code: HD02005-053
Fitment note: check the vehicle build date; confirm the production year; review market-specific styling before ordering 71503-T6P-H00
Product comparison: review transferred hardware; compare visible edge height; inspect the locator direction against the removed bumper trim molding
Installation note: align the centre first; trial-fit without force; protect the visible surface on the Crider
Wholesale enquiry: state annual purchasing volume; retain the product label; confirm the packing method for HD02005-053
Application guidance: The stated application is HONDA Crider 2013, with rear placement and unspecified orientation. Also check adjacent garnish pieces, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
71503-T6P-H00 Bumper Trim Molding Product Overview
71503-T6P-H00 is shown here as the stated bumper trim molding for HONDA Crider 2013. Keeping HD02005-053 beside the 2013 details reduces ambiguity during quotations and inbound inspection.
The stated application is HONDA Crider 2013, with rear placement and unspecified orientation. Also check adjacent garnish pieces, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Crider
During comparison with the original bumper trim, review the end profiles, confirm the surface specification, and check adjacent garnish pieces. At the workshop preparation stage, match the original clip spacing, compare the mounting direction, and confirm the vehicle market.
For a replacement on the unspecified rear area, compare the complete OE number, verify the mounting side, and confirm the installation position. For a repeat wholesale order, compare the removed trim, match the original clip spacing, and confirm the production year.
When separating nearby Crider trim variants, compare every attachment point, review the end profiles, and confirm the production year. While reviewing the supplied photographs, confirm the installation position, check adjacent garnish pieces, and review facelift differences.
Bumper Trim Molding Design and Replacement Notes
During an OE-led check for HD02005-053, review transferred hardware, check the bumper interface, and inspect the moulding width. During the physical comparison, compare the original edge profile, review the centre alignment, and check the panel transition.
For wholesale selection of 71503-T6P-H00, inspect the moulding width, review the centre alignment, and inspect narrow moulding ends. When checking the visible exterior face, review nearby cover openings, inspect the locator direction, and review the surface texture.
Before sourcing this bumper trim molding for Crider, review the centre alignment, compare the end termination, and inspect the fastening slots. At the workshop preparation stage, check the panel transition, review the surface texture, and compare gloss or plating.
For a direct comparison of 71503-T6P-H00, compare the complete OE number, check the bumper interface, protect the visible surface, and request supported carton packing. The bumper trim molding should match the original unspecified rear profile before it is installed or released for shipment.
Installation Guidance
During comparison with the original bumper trim, check lamp-cover clearance, check the final perimeter, and clean the mounting channel. While checking adjacent body parts, inspect damaged mounting points, retain the removed component, and review separate hardware needs.
For a replacement on the unspecified rear area, confirm an even seated fit, align the centre first, and inspect every screw point. Before clips or hardware are transferred, confirm the final trim gap, check adjacent panel gaps, and review separate hardware needs.
When separating nearby Crider trim variants, protect the visible surface, inspect damaged mounting points, and confirm locator engagement. During the physical comparison, check lamp-cover clearance, protect painted panel edges, and confirm an even seated fit.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71503-T6P-H00 |
| Cross-reference numbers | 71503-T6P-H00 71503T6PH00 |
| Internal item code | HD02005-053 |
| Vehicle brand | HONDA |
| Vehicle model | Crider |
| Model year | 2013 |
| Installation area | Rear |
| Side / orientation | Unspecified |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Crider 2013 |
Wholesale Supply and Packing
During an OE-led check for HD02005-053, confirm sample requirements, request export quotation terms, and send original-part photographs. Before packing the confirmed item, retain the product label, state annual purchasing volume, and provide the delivery country.
For wholesale selection of 71503-T6P-H00, state annual purchasing volume, confirm the packing method, and confirm the delivery schedule. For a no-force trial fit, state the required quantity, send original-part photographs, and confirm the surface requirement.
Before sourcing this bumper trim molding for Crider, state the required quantity, request supported carton packing, and confirm sample requirements. While checking adjacent body parts, check the ordered mounting side, confirm the delivery schedule, and include the complete OE number.
The buyer file for 71503-T6P-H00 should combine application vehicle details, item HD02005-053, ordered quantity and packaging needs. This gives procurement teams a clear basis for comparison instead of a generic trim request.
Frequently Asked Questions
What information is needed for a 71503-T6P-H00 quotation?
Send HONDA Crider 2013 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Crider, verify the mounting side, examine the visible finish, retain the removed component, and compare the supplied photographs before installation or quotation.
How should 71503-T6P-H00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Crider, check the vehicle build date, check the adjoining gap, protect the visible surface, and retain the product label before installation or quotation.
Which vehicle is 71503-T6P-H00 listed for?
The source application is HONDA Crider 2013. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For Crider, confirm the vehicle market, inspect the locator direction, review separate hardware needs, and confirm the surface requirement before installation or quotation.
Does 71503-T6P-H00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Crider, compare every attachment point, compare the original length, check adjacent panel gaps, and request protective inner packing before installation or quotation.
Is a model name alone enough to order 71503-T6P-H00?
No. The Crider name is useful for discovery, but OE number 71503-T6P-H00, VIN or build data, side, finish and physical attachment points should agree. For Crider, review the end profiles, review the centre alignment, confirm the final trim gap, and state annual purchasing volume before installation or quotation.
Request a Quote
Send the complete OE reference 71503-T6P-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
