71107-TZX-H00 Bumper Garnish Panel for HONDA Life 2021 Right
Primary OE reference: 71107-TZX-H00
Cross-reference number 1: 71107-TZX-H00
Cross-reference number 2: 71107TZXH00
Product: Bumper Garnish Panel
Vehicle: HONDA Life 2021 (GS2 body code)
Installation area: Front
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-049
Fitment note: review market-specific styling; match the bumper outline; confirm the surface specification before ordering 71107-TZX-H00
Product comparison: inspect the fastening slots; check the moulding curvature; examine the visible finish against the removed bumper garnish panel
Installation note: review separate hardware needs; transfer reusable clips carefully; review the completed alignment on the Life
Wholesale enquiry: send original-part photographs; retain the product label; protect projecting locators for HD02005-049
Application guidance: Selection for Life should combine OE 71107-TZX-H00, body version and attachment geometry. Also review market-specific styling, review the centre alignment, protect painted panel edges, and confirm sample requirements.
71107-TZX-H00 Bumper Garnish Panel Product Overview
71107-TZX-H00 identifies this bumper garnish panel for HONDA Life 2021 (GS2 body code). Supplier reference HD02005-049 defines the right application and helps buyers compare the correct exterior profile before ordering.
Selection for Life should combine OE 71107-TZX-H00, body version and attachment geometry. Also review market-specific styling, review the centre alignment, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Life
When separating nearby Life trim variants, confirm the vehicle market, compare every attachment point, and review the end profiles. Before packing the confirmed item, confirm the production year, confirm the installation position, and check adjacent garnish pieces.
When comparing 71107-TZX-H00 with the removed part, inspect the original contour, check nearby lamp openings, and review market-specific styling. For a no-force trial fit, check the vehicle build date, review the end profiles, and check adjacent garnish pieces.
For the listed 2021 application, check the vehicle build date, match the original clip spacing, and match the stated body style. While checking adjacent body parts, check nearby lamp openings, compare the removed trim, and compare the mounting direction.
Bumper Garnish Panel Design and Replacement Notes
Before sourcing this bumper garnish panel for Life, inspect the moulding width, review the outer-edge shape, and examine the visible finish. During receiving inspection, compare the original edge profile, inspect the locator direction, and check the moulding curvature.
Before confirming this verify against the original part bumper garnish panel, review the centre alignment, review the surface texture, and review transferred hardware. Before the quotation is confirmed, review nearby cover openings, examine the visible finish, and review the centre alignment.
For HONDA Life 2021 (GS2 body code), inspect narrow moulding ends, compare visible edge height, and review the centre alignment. Before packing the confirmed item, check the adjoining gap, inspect the moulding width, and compare the end termination.
For a direct comparison of 71107-TZX-H00, review market-specific styling, compare the original edge profile, support the trim evenly, and provide the delivery country. The bumper garnish panel should match the original right front profile before it is installed or released for shipment.
Installation Guidance
When separating nearby Life trim variants, review the completed alignment, clean the mounting channel, and trial-fit without force. While reviewing the supplied photographs, transfer reusable clips carefully, avoid bending long sections, and inspect every screw point.
When comparing 71107-TZX-H00 with the removed part, trial-fit without force, avoid bending long sections, and review separate hardware needs. Before final installation, clean the mounting channel, transfer reusable clips carefully, and inspect every screw point.
For the listed 2021 application, avoid bending long sections, retain the removed component, and check lamp-cover clearance. During receiving inspection, inspect every screw point, confirm the fitting direction, and protect painted panel edges.
Product Technical Specifications
| Product type | Bumper Garnish Panel |
|---|---|
| Primary OE reference | 71107-TZX-H00 |
| Cross-reference numbers | 71107-TZX-H00 71107TZXH00 |
| Internal item code | HD02005-049 |
| Vehicle brand | HONDA |
| Vehicle model | Life |
| Model year | 2021 |
| Installation area | Front |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Life 2021 (GS2 body code) |
Wholesale Supply and Packing
Before sourcing this bumper garnish panel for Life, confirm the packing method, provide the delivery country, and protect projecting locators. At the workshop preparation stage, state the target application, state annual purchasing volume, and request protective inner packing.
Before confirming this verify against the original part bumper garnish panel, send original-part photographs, confirm sample requirements, and confirm the packing method. For a repeat wholesale order, confirm the surface requirement, review carton edge protection, and confirm the delivery schedule.
For HONDA Life 2021 (GS2 body code), inspect the receiving condition, state the target application, and compare the supplied photographs. While reviewing the supplied photographs, request export quotation terms, confirm the delivery schedule, and provide the delivery country.
A useful RFQ for HD02005-049 identifies 71107-TZX-H00, the front installation area, the destination country and the planned order quantity. Include photos of the removed piece when fitment is still being reviewed.
Frequently Asked Questions
Does 71107-TZX-H00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Life, review the end profiles, inspect the fastening slots, avoid bending long sections, and confirm sample requirements before installation or quotation.
Is a model name alone enough to order 71107-TZX-H00?
No. The Life name is useful for discovery, but OE number 71107-TZX-H00, VIN or build data, side, finish and physical attachment points should agree. For Life, confirm the production year, compare visible edge height, support the trim evenly, and request supported carton packing before installation or quotation.
What should be inspected when 71107-TZX-H00 arrives?
Check the bumper garnish panel part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Life, confirm the installation position, review the surface texture, protect painted panel edges, and state the required quantity before installation or quotation.
What information is needed for a 71107-TZX-H00 quotation?
Send HONDA Life 2021 (GS2 body code) vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Life, check adjacent garnish pieces, review the outer-edge shape, transfer reusable clips carefully, and request export quotation terms before installation or quotation.
How should 71107-TZX-H00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Life, review facelift differences, inspect narrow moulding ends, inspect the surrounding guides, and review carton edge protection before installation or quotation.
Request a Quote
Send the complete OE reference 71107-TZX-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
