71507-TB0-H01 Bumper Trim Molding for HONDA Accord 2013 Left
Primary OE reference: 71507-TB0-H01
Cross-reference number 1: 71507-TB0-H01
Cross-reference number 2: 71507TB0H01
Product: Bumper Trim Molding
Vehicle: HONDA Accord 2013
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-009
Fitment note: review market-specific styling; match the bumper outline; confirm the surface specification before ordering 71507-TB0-H01
Product comparison: compare gloss or plating; inspect narrow moulding ends; check the adjoining gap against the removed bumper trim molding
Installation note: align the centre first; trial-fit without force; protect the visible surface on the Accord
Wholesale enquiry: provide the delivery country; confirm the delivery schedule; confirm separate accessory needs for HD02005-009
Application guidance: This bumper trim molding is intended for the left rear position on Accord. Also review market-specific styling, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
71507-TB0-H01 Bumper Trim Molding Product Overview
This application-led listing presents 71507-TB0-H01 as a bumper trim molding for HONDA Accord 2013. Item HD02005-009 is intended for OE-number comparison rather than shape-only selection.
This bumper trim molding is intended for the left rear position on Accord. Also review market-specific styling, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Accord
For HONDA Accord 2013, check the vehicle build date, confirm the surface specification, and compare the mounting direction. Before packing the confirmed item, confirm the production year, verify the mounting side, and check nearby lamp openings.
When preparing a Accord exterior repair, compare the mounting direction, verify the mounting side, and match the bumper outline. For a no-force trial fit, match the original clip spacing, review facelift differences, and review market-specific styling.
During comparison with the original bumper trim, verify the mounting side, inspect the original contour, and compare every attachment point. While checking adjacent body parts, check nearby lamp openings, confirm the installation position, and review market-specific styling.
Bumper Trim Molding Design and Replacement Notes
For the listed 2013 application, inspect the moulding width, check the moulding curvature, and review the surface texture. During receiving inspection, compare the original length, inspect the moulding width, and check the moulding curvature.
Before the removed component is discarded, review the centre alignment, review transferred hardware, and examine the visible finish. Before the quotation is confirmed, review the surface texture, review nearby cover openings, and review the centre alignment.
During an OE-led check for HD02005-009, inspect narrow moulding ends, compare the original length, and review nearby cover openings. Before packing the confirmed item, review the outer-edge shape, inspect the locator direction, and compare the end termination.
For a direct comparison of 71507-TB0-H01, review market-specific styling, review the surface texture, protect the visible surface, and confirm the packing method. The bumper trim molding should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
For HONDA Accord 2013, align the centre first, check lamp-cover clearance, and review the completed alignment. While reviewing the supplied photographs, align the centre first, check lamp-cover clearance, and review the completed alignment.
When preparing a Accord exterior repair, retain the removed component, inspect every screw point, and protect painted panel edges. Before final installation, check the final perimeter, review the completed alignment, and confirm the final trim gap.
During comparison with the original bumper trim, check the final perimeter, clean the mounting channel, and inspect damaged mounting points. During receiving inspection, retain the removed component, review separate hardware needs, and confirm the final trim gap.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71507-TB0-H01 |
| Cross-reference numbers | 71507-TB0-H01 71507TB0H01 |
| Internal item code | HD02005-009 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2013 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2013 |
Wholesale Supply and Packing
For the listed 2013 application, confirm sample requirements, state the target application, and review carton edge protection. At the workshop preparation stage, confirm separate accessory needs, compare the supplied photographs, and check the ordered mounting side.
Before the removed component is discarded, state annual purchasing volume, confirm the delivery schedule, and send original-part photographs. For a repeat wholesale order, protect projecting locators, confirm sample requirements, and compare the supplied photographs.
During an OE-led check for HD02005-009, state the required quantity, support the moulding length, and compare the supplied photographs. While reviewing the supplied photographs, request protective inner packing, protect projecting locators, and confirm separate accessory needs.
Distributors sourcing 71507-TB0-H01 should keep HD02005-009 and the left position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.
Frequently Asked Questions
Does 71507-TB0-H01 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Accord, confirm the installation position, inspect the fastening slots, confirm the final trim gap, and compare the supplied photographs before installation or quotation.
Is a model name alone enough to order 71507-TB0-H01?
No. The Accord name is useful for discovery, but OE number 71507-TB0-H01, VIN or build data, side, finish and physical attachment points should agree. For Accord, check adjacent garnish pieces, compare visible edge height, inspect every screw point, and retain the product label before installation or quotation.
What should be inspected when 71507-TB0-H01 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Accord, review facelift differences, review the surface texture, align the centre first, and confirm the surface requirement before installation or quotation.
What information is needed for a 71507-TB0-H01 quotation?
Send HONDA Accord 2013 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Accord, match the bumper outline, review the outer-edge shape, confirm an even seated fit, and request protective inner packing before installation or quotation.
How should 71507-TB0-H01 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Accord, compare the mounting direction, inspect narrow moulding ends, avoid bending long sections, and state annual purchasing volume before installation or quotation.
Request a Quote
Send the complete OE reference 71507-TB0-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
