71507-SDE-T01 Bumper Corner Trim for HONDA Accord 2003 Left
Primary OE reference: 71507-SDE-T01
Cross-reference number 1: 71507-SDE-T01
Cross-reference number 2: 71507SDET01
Product: Bumper Corner Trim
Vehicle: HONDA Accord 2003
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-001
Fitment note: compare every attachment point; confirm the surface specification; compare the removed trim before ordering 71507-SDE-T01
Product comparison: examine the visible finish; compare gloss or plating; inspect the moulding width against the removed bumper corner trim
Installation note: retain the removed component; review the completed alignment; inspect damaged mounting points on the Accord
Wholesale enquiry: send original-part photographs; retain the product label; protect projecting locators for HD02005-001
Application guidance: The stated application is HONDA Accord 2003, with rear placement and left orientation. Also compare the complete OE number, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
71507-SDE-T01 Bumper Corner Trim Product Overview
HONDA Accord 2003 buyers can begin identification with 71507-SDE-T01. This bumper corner trim is registered under HD02005-001, with left orientation retained for quotation, sample review and receiving control.
The stated application is HONDA Accord 2003, with rear placement and left orientation. Also compare the complete OE number, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Accord
For wholesale selection of 71507-SDE-T01, review market-specific styling, compare the mounting direction, and compare every attachment point. Before final installation, confirm the surface specification, review facelift differences, and check the vehicle build date.
Before sourcing this bumper corner trim for Accord, check adjacent garnish pieces, confirm the vehicle market, and match the stated body style. During receiving inspection, inspect the original contour, confirm the installation position, and check the vehicle build date.
Before confirming this verify against the original part bumper corner trim, match the stated body style, confirm the installation position, and confirm the surface specification. Before the quotation is confirmed, confirm the production year, check nearby lamp openings, and review the end profiles.
Bumper Corner Trim Design and Replacement Notes
For a replacement on the left rear area, compare visible edge height, review the outer-edge shape, and compare the original edge profile. For a repeat wholesale order, check the moulding curvature, compare the end termination, and check the panel transition.
When separating nearby Accord trim variants, check the moulding curvature, review the surface texture, and compare the original length. While reviewing the supplied photographs, inspect the moulding width, check the moulding curvature, and review the surface texture.
When comparing 71507-SDE-T01 with the removed part, compare gloss or plating, compare visible edge height, and compare the end termination. Before final installation, compare the original length, compare the original edge profile, and compare gloss or plating.
For a direct comparison of 71507-SDE-T01, review the end profiles, check the panel transition, check lamp-cover clearance, and provide the delivery country. The bumper corner trim should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
For wholesale selection of 71507-SDE-T01, align the centre first, confirm locator engagement, and inspect every screw point. When checking the visible exterior face, check the final perimeter, confirm the final trim gap, and trial-fit without force.
Before sourcing this bumper corner trim for Accord, retain the removed component, confirm an even seated fit, and trial-fit without force. At the workshop preparation stage, retain the removed component, confirm an even seated fit, and trial-fit without force.
Before confirming this verify against the original part bumper corner trim, check the final perimeter, review the completed alignment, and confirm the final trim gap. For a repeat wholesale order, support the trim evenly, trial-fit without force, and inspect damaged mounting points.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 71507-SDE-T01 |
| Cross-reference numbers | 71507-SDE-T01 71507SDET01 |
| Internal item code | HD02005-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2003 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2003 |
Wholesale Supply and Packing
For a replacement on the left rear area, state the target application, request export quotation terms, and provide the delivery country. Before clips or hardware are transferred, support the moulding length, confirm separate accessory needs, and state the destination port.
When separating nearby Accord trim variants, request export quotation terms, confirm the packing method, and state the destination port. During the physical comparison, confirm the delivery schedule, request protective inner packing, and state the required quantity.
When comparing 71507-SDE-T01 with the removed part, provide the delivery country, request supported carton packing, and retain the product label. When checking the visible exterior face, confirm separate accessory needs, request export quotation terms, and request protective inner packing.
Order review for 71507-SDE-T01 should connect supplier code HD02005-001 with the rear application, buyer-approved photos and logistics instructions. Keep the same identifiers on samples and shipping paperwork.
Frequently Asked Questions
Can a photo alone verify 71507-SDE-T01?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71507-SDE-T01 and HD02005-001 with the removed part dimensions. For Accord, compare the removed trim, compare the end termination, confirm locator engagement, and state the destination port before installation or quotation.
Is professional installation recommended for 71507-SDE-T01?
Yes. A workshop can dry-fit HD02005-001, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Accord, compare the complete OE number, review nearby cover openings, clean the mounting channel, and compare the supplied photographs before installation or quotation.
Can the opposite-side trim replace 71507-SDE-T01?
Normally no. The listing specification details the left orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Accord, check nearby lamp openings, check the panel transition, confirm the fitting direction, and retain the product label before installation or quotation.
What product does OE 71507-SDE-T01 identify?
71507-SDE-T01 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Accord, confirm the surface specification, inspect the moulding width, inspect damaged mounting points, and confirm the surface requirement before installation or quotation.
How should the position of 71507-SDE-T01 be confirmed?
This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Accord, match the stated body style, compare gloss or plating, review the completed alignment, and request protective inner packing before installation or quotation.
Request a Quote
Send the complete OE reference 71507-SDE-T01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
