86561-1W000 Front Bumper Grille for KIA Rio 2011
OE lookup: 86561-1W000 as the primary lookup number
Catalogue code: KA02004-034 for quotation and order tracking
Make: KIA
Model line: Rio (2011)
Fitment record: 2011 KIA Rio (sedan); verify by VIN and original part
Mounting area: Front bumper area
Reference numbers:
86561-1W000
Fitment check: Confirm VIN, build date and the photographed mounting pattern for 86561-1W000
Purchase note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86561-1W000 on Rio uses KA02004-034 as the controlled front-bumper line; compare Rio frame contour, 86561-1W000 mesh geometry and KA02004-034 attachment direction
Approval record: KA02004-034 should link the 2011 KIA Rio (sedan) vehicle evidence to 86561-1W000; retain Rio opening photos and front grille measurements with the buyer decision
Component: Front Bumper Grille for 2011 KIA Rio
86561-1W000 Front Bumper Grille Product Overview
The subject is a front bumper grille catalogued as 86561-1W000 for 2011 KIA Rio (sedan). Supplier code KA02004-034 supports traceable enquiries, sample approval and repeat-order documentation.
OE-Led Fitment Verification for 86561-1W000
Fitment confidence requires three agreeing sources: 86561-1W000, 2011 KIA Rio (sedan) and the physical front grille. Do not approve KA02004-034 from a similar mesh pattern alone.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Rio Bumper Grille Function and Position
Within the Rio fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille. The item is catalogued as sedan.
The source application is recorded as 11款 锐欧 UB 三厢版 前杠格栅. This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.
Inspection, Packaging and Receiving Control
For KA02004-034, quality control begins with identity: confirm 86561-1W000 and the stated front bumper grille. Next review deformation, edge damage, mounting features and colour or texture consistency under neutral light.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Workshop Handling and Installation Review
Professional trial fitting is recommended for KA02004-034. Confirm that the Rio bumper skin, side guides and underbody connections are correctly seated before judging grille alignment.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Product-Specific Approval Record for 86561-1W000
The following review points belong to KA02004-034 and the stated 2011 KIA Rio (sedan) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Vehicle evidence 1 — Rio / 86561-1W000: compare clip spacing without bending the replacement grille for Rio item KA02004-034 under OE reference 86561-1W000.
- Catalogue proof 2 — KA02004-034 / Front: retain a signed control sample for repeat purchasing decisions for Rio item KA02004-034 under OE reference 86561-1W000.
- Packing control 3 — 2011 KIA Rio (sedan) / KA02004-034: compare adjacent moulding gaps before locking the centre clips for Rio item KA02004-034 under OE reference 86561-1W000.
- Identity gate 4 — 86561-1W000 / KA02004-034: inspect mounting slots for collision distortion before trial fitting for Rio item KA02004-034 under OE reference 86561-1W000.
- Workshop checkpoint 5 — Rio / 86561-1W000: verify the photographed part and physical sample share one revision for Rio item KA02004-034 under OE reference 86561-1W000.
- Receiving record 6 — KA02004-034 / Front: record the mesh orientation alongside the vehicle production label for Rio item KA02004-034 under OE reference 86561-1W000.
- Fitment file 7 — 2011 KIA Rio (sedan) / KA02004-034: mark lamp or trim interfaces on the buyer approval photograph for Rio item KA02004-034 under OE reference 86561-1W000.
- Geometry control 8 — 86561-1W000 / KA02004-034: note surface texture under neutral lighting before installation for Rio item KA02004-034 under OE reference 86561-1W000.
- Sample decision 9 — Rio / 86561-1W000: link receiving photographs to the commercial order-line number for Rio item KA02004-034 under OE reference 86561-1W000.
- Order trace 10 — KA02004-034 / Front: record any market-specific openings shown on the original bumper for Rio item KA02004-034 under OE reference 86561-1W000.
- Vehicle evidence 11 — 2011 KIA Rio (sedan) / KA02004-034: match the grille outline to the stated body style and facelift for Rio item KA02004-034 under OE reference 86561-1W000.
- Catalogue proof 12 — 86561-1W000 / KA02004-034: measure the outer frame before comparing the retained bumper aperture for Rio item KA02004-034 under OE reference 86561-1W000.
- Packing control 13 — Rio / 86561-1W000: check the centre section against the bumper cover reference points for Rio item KA02004-034 under OE reference 86561-1W000.
- Identity gate 14 — KA02004-034 / Front: confirm the lower edge follows the original underbody connection for Rio item KA02004-034 under OE reference 86561-1W000.
- Workshop checkpoint 15 — 2011 KIA Rio (sedan) / KA02004-034: verify left and right orientation from the vehicle-facing side for Rio item KA02004-034 under OE reference 86561-1W000.
Application Evidence Narrative for KA02004-034
86561-1W000 identifies this front bumper grille for 2011 KIA Rio (sedan). The record links OE-led search intent with supplier code KA02004-034, a precise vehicle reference and the photographs saved with the source item.
Positioned at the front of the Rio, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the sedan.
86561-1W000 is documented here as the stated front bumper grille for 2011 KIA Rio (sedan). Keeping catalogue code KA02004-034 beside the application reduces ambiguity during quotations and receiving inspection.
Positioned at the front of the Rio, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the sedan.
Prepared for wholesale and replacement-part enquiries, 86561-1W000 covers a front bumper grille for 2011 KIA Rio (sedan). The KA02004-034 record combines entity facts, fitment cautions and practical order information.
A correct front bumper grille helps return the Rio bumper to its designed appearance and ventilation arrangement. It is not described as the complete bumper cover, reinforcement or energy absorber. The product row notes the sedan.
The identity chain for KA02004-034 is KIA Rio, 2011, front bumper position and OE 86561-1W000. Keep KA02004-034 beside Rio vehicle evidence, keep 86561-1W000 beside the removed grille marking, and keep the front location beside the approval photographs.
86561-1W000 Front Bumper Grille for KIA Rio 2011 is the controlled search entity for this page. In a buyer file, 86561-1W000 should lead the Rio comparison, KA02004-034 should lead the supplier trace, and 2011 KIA Rio (sedan) should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86561-1W000 |
| Cross-reference numbers | 86561-1W000 |
| Internal item code | KA02004-034 |
| Vehicle brand | KIA |
| Vehicle model | Rio |
| Model year | 2011 |
| Installation position | Front bumper area |
| Applicable vehicle | 2011 KIA Rio (sedan) |
Wholesale Procurement for KA02004-034
The clearest B2B request combines 86561-1W000, supplier code KA02004-034, 2011 KIA Rio (sedan) and destination. This makes it easier to separate technical approval from commercial terms and shipping choices.
This page is intended to answer the central sourcing questions around 86561-1W000: what it is, where it fits, how it should be checked and what purchasing data is required.
Frequently Asked Questions
Can this front bumper grille fit every Rio?
No universal-fit claim is made. Facelift, body style, region and trim can change the grille. This item is described as the sedan.
Why is the bumper position important for 86561-1W000?
Front, rear, upper, lower and side grille pieces are not interchangeable. This record describes the front bumper location.
Are brackets, emblems and fasteners included with 86561-1W000?
Supply scope follows the pictured KA02004-034 component. Confirm loose hardware, badges, covers and accessories with the quotation before ordering.
How should 86561-1W000 be checked after delivery?
Verify identity first, then inspect the front bumper grille frame, mesh, tabs, finish and packing-related distortion before installation.
Where is the 86561-1W000 grille installed on the Rio?
The listing places it in the front bumper area of the Rio. It is not presented as a complete bumper cover or crash reinforcement.
Request a Product and Fitment Review
Send the complete OE reference 86561-1W000, item code KA02004-034, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
