86522-1E000 Front Lower Bumper Grille for HYUNDAI Accent 2006
Product: Front Lower Bumper Grille for 2006 HYUNDAI Accent
Primary OE: 86522-1E000 as the primary lookup number
Item code: HY02004-006 for quotation and order tracking
Vehicle brand: HYUNDAI
Vehicle model: Accent (2006)
Application: 2006 HYUNDAI Accent; verify by VIN and original part
Position: Front bumper area
Cross-reference numbers:
86522-1E000
Verification: Match the OE number, bumper opening and tabs before ordering HY02004-006
Supply note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86522-1E000 on Accent uses HY02004-006 as the controlled front-bumper line; compare Accent frame contour, 86522-1E000 mesh geometry and HY02004-006 attachment direction
Approval record: HY02004-006 should link the 2006 HYUNDAI Accent vehicle evidence to 86522-1E000; retain Accent opening photos and front grille measurements with the buyer decision
86522-1E000 Front Lower Bumper Grille Product Overview
2006 HYUNDAI Accent buyers can begin identification with 86522-1E000. This front lower bumper grille is registered under HY02004-006 and described with the application limits needed by parts specialists and body shops.
Accent Bumper Grille Function and Position
The front lower bumper grille occupies the front exterior fascia of the Accent. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.
The saved source description is 06 款雅绅特 前杠下中网. It should be compared with VIN data and the removed grille before the application is approved.
OE-Led Fitment Verification for 86522-1E000
Use 86522-1E000 as the first filter and vehicle production data as the second. A trim or facelift change can make HY02004-006 unsuitable even where 2006 HYUNDAI Accent appears broadly similar.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Workshop Handling and Installation Review
The front fascia should be inspected for previous repair distortion before HY02004-006 is installed. Reusing damaged clips can create loose seating or uneven gaps on the Accent.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Inspection, Packaging and Receiving Control
The 86522-1E000 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-006 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 86522-1E000
The following review points belong to HY02004-006 and the stated 2006 HYUNDAI Accent application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Identity gate 1 — HY02004-006 / Front: retain a signed control sample for repeat purchasing decisions for Accent item HY02004-006 under OE reference 86522-1E000.
- Workshop checkpoint 2 — 2006 HYUNDAI Accent / HY02004-006: compare adjacent moulding gaps before locking the centre clips for Accent item HY02004-006 under OE reference 86522-1E000.
- Receiving record 3 — 86522-1E000 / HY02004-006: inspect mounting slots for collision distortion before trial fitting for Accent item HY02004-006 under OE reference 86522-1E000.
- Fitment file 4 — Accent / 86522-1E000: verify the photographed part and physical sample share one revision for Accent item HY02004-006 under OE reference 86522-1E000.
- Geometry control 5 — HY02004-006 / Front: record the mesh orientation alongside the vehicle production label for Accent item HY02004-006 under OE reference 86522-1E000.
- Sample decision 6 — 2006 HYUNDAI Accent / HY02004-006: mark lamp or trim interfaces on the buyer approval photograph for Accent item HY02004-006 under OE reference 86522-1E000.
- Order trace 7 — 86522-1E000 / HY02004-006: note surface texture under neutral lighting before installation for Accent item HY02004-006 under OE reference 86522-1E000.
- Vehicle evidence 8 — Accent / 86522-1E000: link receiving photographs to the commercial order-line number for Accent item HY02004-006 under OE reference 86522-1E000.
- Catalogue proof 9 — HY02004-006 / Front: record any market-specific openings shown on the original bumper for Accent item HY02004-006 under OE reference 86522-1E000.
- Packing control 10 — 2006 HYUNDAI Accent / HY02004-006: match the grille outline to the stated body style and facelift for Accent item HY02004-006 under OE reference 86522-1E000.
- Identity gate 11 — 86522-1E000 / HY02004-006: measure the outer frame before comparing the retained bumper aperture for Accent item HY02004-006 under OE reference 86522-1E000.
- Workshop checkpoint 12 — Accent / 86522-1E000: check the centre section against the bumper cover reference points for Accent item HY02004-006 under OE reference 86522-1E000.
- Receiving record 13 — HY02004-006 / Front: confirm the lower edge follows the original underbody connection for Accent item HY02004-006 under OE reference 86522-1E000.
- Fitment file 14 — 2006 HYUNDAI Accent / HY02004-006: verify left and right orientation from the vehicle-facing side for Accent item HY02004-006 under OE reference 86522-1E000.
- Geometry control 15 — 86522-1E000 / HY02004-006: check transport support around projecting corners and narrow bridges for Accent item HY02004-006 under OE reference 86522-1E000.
Application Evidence Narrative for HY02004-006
For the bumper grille line identified by HY02004-006, the principal OE reference is 86522-1E000. It is listed for 2006 HYUNDAI Accent and should be approved from the number, vehicle details and physical mounting pattern together.
Mounted in the front bumper area, a front lower bumper grille completes a defined opening and supports the intended visual and airflow path of the Accent. Its perimeter, mesh pattern and fastening points are vehicle-specific.
Prepared for wholesale and replacement-part enquiries, 86522-1E000 covers a front lower bumper grille for 2006 HYUNDAI Accent. The HY02004-006 record combines entity facts, fitment cautions and practical order information.
The front lower bumper grille occupies the front exterior fascia of the Accent. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.
A sourcing check for 2006 HYUNDAI Accent can use 86522-1E000 to locate this front lower bumper grille. The page records HY02004-006 together with product facts that search engines, AI answer systems and professional buyers can interpret directly.
The front lower bumper grille forms part of the Accent bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface.
The identity chain for HY02004-006 is HYUNDAI Accent, 2006, front bumper position and OE 86522-1E000. Keep HY02004-006 beside Accent vehicle evidence, keep 86522-1E000 beside the removed grille marking, and keep the front location beside the approval photographs.
86522-1E000 Front Lower Bumper Grille for HYUNDAI Accent 2006 is the controlled search entity for this page. In a buyer file, 86522-1E000 should lead the Accent comparison, HY02004-006 should lead the supplier trace, and 2006 HYUNDAI Accent should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Lower Bumper Grille |
|---|---|
| Primary OE reference | 86522-1E000 |
| Cross-reference numbers | 86522-1E000 |
| Internal item code | HY02004-006 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Front bumper area |
| Applicable vehicle | 2006 HYUNDAI Accent |
Wholesale Procurement for HY02004-006
A traceable order file for 2006 HYUNDAI Accent should show 86522-1E000, HY02004-006, buyer-approved photos and requested quantity. Confirm carton dimensions before comparing landed costs for consolidated shipments.
For repeat programmes, keep HY02004-006, the approved sample, fitment photos and packaging standard under one revision-controlled record.
Frequently Asked Questions
What does 86522-1E000 identify?
86522-1E000 is the primary reference recorded for this front lower bumper grille and 2006 HYUNDAI Accent. It should be checked against the original part and vehicle data.
How should fitment for 86522-1E000 be approved?
Confirm 2006 HYUNDAI Accent, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-006 on the review record.
What should be included in a wholesale enquiry for 86522-1E000?
Send 86522-1E000, item HY02004-006, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Should installers compare the original Accent grille with HY02004-006?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
What vehicle information helps verify HY02004-006?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2006 HYUNDAI Accent.
Request a Product and Fitment Review
Send the complete OE reference 86522-1E000, item code HY02004-006, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
