71103-TM0-T10 Front Bumper Grille for HONDA City 2012
Internal reference: HD02004-035 for quotation and order tracking
Automotive brand: HONDA
Nameplate: City (2012)
Vehicle use: 2012 HONDA City; verify by VIN and original part
Fitting position: Front bumper area
OE comparisons:
71103-TM0-T10
Approval step: Match the OE number, bumper opening and tabs before ordering HD02004-035
Wholesale detail: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 71103-TM0-T10 on City uses HD02004-035 as the controlled front-bumper line; compare City frame contour, 71103-TM0-T10 mesh geometry and HD02004-035 attachment direction
Approval record: HD02004-035 should link the 2012 HONDA City vehicle evidence to 71103-TM0-T10; retain City opening photos and front grille measurements with the buyer decision
Part identity: Front Bumper Grille for 2012 HONDA City
Main reference: 71103-TM0-T10 as the primary lookup number
71103-TM0-T10 Front Bumper Grille Product Overview
This application-led listing presents 71103-TM0-T10 as a front bumper grille for 2012 HONDA City. Item HD02004-035 is intended for OE-number comparison, not shape-only selection.
Workshop Handling and Installation Review
Support the City bumper cover while releasing the original front grille. For HD02004-035, align locating points first, confirm an even perimeter gap and only then lock the remaining clips.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
OE-Led Fitment Verification for 71103-TM0-T10
Use 71103-TM0-T10 as the first filter and vehicle production data as the second. A trim or facelift change can make HD02004-035 unsuitable even where 2012 HONDA City appears broadly similar.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
City Bumper Grille Function and Position
This is a non-structural front bumper component for the City. The front bumper grille contributes to front- or rear-fascia finish and can differ after a facelift even when the vehicle badge stays unchanged.
For this line, the workbook application reads 12 锋范 前杠网格. It is included as traceable source evidence alongside the normalized English vehicle entity.
Inspection, Packaging and Receiving Control
The 71103-TM0-T10 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HD02004-035 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 71103-TM0-T10
The following review points belong to HD02004-035 and the stated 2012 HONDA City application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Geometry control 1 — HD02004-035 / Front: record any market-specific openings shown on the original bumper for City item HD02004-035 under OE reference 71103-TM0-T10.
- Sample decision 2 — 2012 HONDA City / HD02004-035: match the grille outline to the stated body style and facelift for City item HD02004-035 under OE reference 71103-TM0-T10.
- Order trace 3 — 71103-TM0-T10 / HD02004-035: measure the outer frame before comparing the retained bumper aperture for City item HD02004-035 under OE reference 71103-TM0-T10.
- Vehicle evidence 4 — City / 71103-TM0-T10: check the centre section against the bumper cover reference points for City item HD02004-035 under OE reference 71103-TM0-T10.
- Catalogue proof 5 — HD02004-035 / Front: confirm the lower edge follows the original underbody connection for City item HD02004-035 under OE reference 71103-TM0-T10.
- Packing control 6 — 2012 HONDA City / HD02004-035: verify left and right orientation from the vehicle-facing side for City item HD02004-035 under OE reference 71103-TM0-T10.
- Identity gate 7 — 71103-TM0-T10 / HD02004-035: check transport support around projecting corners and narrow bridges for City item HD02004-035 under OE reference 71103-TM0-T10.
- Workshop checkpoint 8 — City / 71103-TM0-T10: confirm transferred covers or badges fit without altering the frame for City item HD02004-035 under OE reference 71103-TM0-T10.
- Receiving record 9 — HD02004-035 / Front: keep the production-date evidence beside the approved OE lookup for City item HD02004-035 under OE reference 71103-TM0-T10.
- Fitment file 10 — 2012 HONDA City / HD02004-035: photograph every locator before the damaged grille leaves the workshop for City item HD02004-035 under OE reference 71103-TM0-T10.
- Geometry control 11 — 71103-TM0-T10 / HD02004-035: inspect side returns for the same depth and fastening direction for City item HD02004-035 under OE reference 71103-TM0-T10.
- Sample decision 12 — City / 71103-TM0-T10: compare clip spacing without bending the replacement grille for City item HD02004-035 under OE reference 71103-TM0-T10.
- Order trace 13 — HD02004-035 / Front: retain a signed control sample for repeat purchasing decisions for City item HD02004-035 under OE reference 71103-TM0-T10.
- Vehicle evidence 14 — 2012 HONDA City / HD02004-035: compare adjacent moulding gaps before locking the centre clips for City item HD02004-035 under OE reference 71103-TM0-T10.
- Catalogue proof 15 — 71103-TM0-T10 / HD02004-035: inspect mounting slots for collision distortion before trial fitting for City item HD02004-035 under OE reference 71103-TM0-T10.
Application Evidence Narrative for HD02004-035
2012 HONDA City buyers can begin identification with 71103-TM0-T10. This front bumper grille is registered under HD02004-035 and described with the application limits needed by parts specialists and body shops.
The front bumper grille forms part of the City bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface.
Reference 71103-TM0-T10 connects the pictured front bumper grille to 2012 HONDA City. Its internal line code, HD02004-035, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
On the City, this front grille element closes a model-shaped aperture while permitting the designed air passage. Clip direction, outer contour and adjacent mouldings matter as much as the overall outline.
2012 HONDA City buyers can begin identification with 71103-TM0-T10. This front bumper grille is registered under HD02004-035 and described with the application limits needed by parts specialists and body shops.
The listed grille belongs to the front bumper stack of the City. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area.
The identity chain for HD02004-035 is HONDA City, 2012, front bumper position and OE 71103-TM0-T10. Keep HD02004-035 beside City vehicle evidence, keep 71103-TM0-T10 beside the removed grille marking, and keep the front location beside the approval photographs.
71103-TM0-T10 Front Bumper Grille for HONDA City 2012 is the controlled search entity for this page. In a buyer file, 71103-TM0-T10 should lead the City comparison, HD02004-035 should lead the supplier trace, and 2012 HONDA City should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 71103-TM0-T10 |
| Cross-reference numbers | 71103-TM0-T10 |
| Internal item code | HD02004-035 |
| Vehicle brand | HONDA |
| Vehicle model | City |
| Model year | 2012 |
| Installation position | Front bumper area |
| Applicable vehicle | 2012 HONDA City |
Wholesale Procurement for HD02004-035
Purchasing teams can identify the line as 71103-TM0-T10 / HD02004-035 for 2012 HONDA City. Providing annual demand and first-order quantity helps the supplier discuss lead time, packing and freight consolidation accurately.
Yongshang Auto supports OE-led sourcing for exterior body parts. A final quotation for 71103-TM0-T10 can be prepared after the buyer confirms vehicle evidence, quantity and destination.
Frequently Asked Questions
Should installers compare the original City grille with HD02004-035?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
What vehicle information helps verify HD02004-035?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2012 HONDA City.
What does 71103-TM0-T10 identify?
71103-TM0-T10 is the primary reference recorded for this front bumper grille and 2012 HONDA City. It should be checked against the original part and vehicle data.
How should fitment for 71103-TM0-T10 be approved?
Confirm 2012 HONDA City, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HD02004-035 on the review record.
What should be included in a wholesale enquiry for 71103-TM0-T10?
Send 71103-TM0-T10, item HD02004-035, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Request a Product and Fitment Review
Send the complete OE reference 71103-TM0-T10, item code HD02004-035, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
