80A 807 061A Front Bumper Air Deflector for AUDI Q5 2018
Product: Front Bumper Air Deflector
Primary OE: 80A 807 061A
Item code: AD02003-079
Cross-reference numbers:
80A 807 061A
80A807061A
Brand: AUDI
Model: Q5
Application reference: 2018 AUDI Q5
Position: Front
Verification: Check whether the repair needs this exact front bumper air deflector rather than a neighbouring upper, lower or complete-cover variant.
Supply note: Identify sample or bulk demand and include the destination so shipment volume and protection can be evaluated.
80A 807 061A is catalogued for body-shop enquiries that begin with an exact OE-number match. For 2018 AUDI Q5, Yongshang Auto tracks the requested front bumper air deflector as AD02003-079.
AD02003-079 requires an application-specific review: The visible profile, mounting edges and equipment apertures must be compared with the removed bumper-aero part before refinishing begins. The same information helps receiving staff identify the correct carton and panel.
Panel Geometry Confirmation
Fitment guidance for 80A 807 061A. Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. The result should be recorded before commercial release of the requested quantity.
The front location on 2018 AUDI Q5 should be reviewed as follows: Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. Those observations should remain available during sample and bulk-order review.
Product Technical Specifications
| Product type | Front Bumper Air Deflector |
|---|---|
| Primary OE reference | 80A 807 061A |
| Cross-reference numbers | 80A 807 061A |
| Internal item code | AD02003-079 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2018 AUDI Q5 |
Exterior Panel Replacement Objective
Functional context for 80A 807 061A. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. The purchase team can use the recorded result when confirming the order line.
Application note for item AD02003-079. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. The buyer can then connect the physical review to the supplier item record.
Body-Shop Preparation Notes
Receiving note for carton AD02003-079. If the panel has been folded or closely packed for freight, follow the agreed recovery method and allow sufficient time before measuring the final contour. The completed check supports a traceable discussion between buyer and supplier.
Pre-finish check for 2018 AUDI Q5. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. The result should be recorded before commercial release of the requested quantity.
Wholesale Enquiry Information
A quotation for 80A 807 061A should reflect this guidance: Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. The same information helps receiving staff identify the correct carton and panel.
The 2 square images attached to AD02003-079 support visual review. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. The same information helps receiving staff identify the correct carton and panel.
Frequently Asked Questions
What should be compared before approving OE 80A 807 061A?
2018 AUDI Q5 is the stated reference for this page. Photograph the surrounding grille, lamps and adjacent body panels as well as the removed bumper-aero part. These interfaces help distinguish similar designs. The completed check supports a traceable discussion between buyer and supplier.
Which supplier identifier follows this panel through shipment?
Supplier-code context for this front bumper air deflector. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. Keep AD02003-079 beside 80A 807 061A in the final commercial record.
Where can a visual mismatch appear on this bumper spoiler?
Panel-comparison guidance for 2018 AUDI Q5. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. The purchase team can use the recorded result when confirming the order line.
What does pre-paint acceptance mean for this application?
Finishing guidance for OE 80A 807 061A. Resolve damaged brackets or uncertain equipment openings first; coating the part should be the last step in the approval sequence. The buyer can then connect the physical review to the supplier item record.
What should a distributor send before requesting bulk pricing?
Wholesale request for AD02003-079. Confirm whether loose accessories are expected and specify carton marks, corner protection and pre-shipment photograph requirements. The completed check supports a traceable discussion between buyer and supplier.
Request a Quote for 80A 807 061A
If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer bumper-aero component unless a quotation states otherwise. For Yongshang Auto’s review, connect 80A 807 061A and AD02003-079 with the intended 2018 AUDI Q5, requested quantity and delivery market.
